Material | Mild Steel |
Brand | Supremex |
Country of Origin | Made in India |
Capacity | 100 Litre |
Wheels Capacity | 250 Kg |
Surface Finish | Color Coated |
The Mobile Foam Unit has been designed for rapid one-man deployment and is ideal for the protection of oil storage and loading terminals, paints or solvent Stores, Boiler rooms, Ships'' Engine rooms and all similar high-risk areas. The unit only requires connection to a suitable pressurized water supply and is Manufactured in high strength corrosion-resistant materials such as FRP/S.S. or M.S. duly anti-corrosive Treated. (Inside)
Standard fittings:
Including Low Expansion & medium, Expansion with their Matched inductors.
Optional fire:
Material | Stainless Steel |
Brand | Supremex |
Country of Origin | Made in India |
Inlet Pressure | 10 Kg/ cm3 |
Water Flow Rate | 250 LPM |
By Pass Flow Rate | 95 LPM |
Dimension | 902 X 927 X 495 mm |
Weight | 55 Kg |
Surface Finish | Color Coated |
We provide Super-Ex High Expansion Foam Generator having water turbine powered and high output. It is accumulated with By-Pass System and Built-In Foam Induction.
Features:
Performance Table:
Inlet Pressure | Total Water Flow | By-Pass Flow | Water Used For Making Foam | Expanded Form Produced | Expansion | |
Kg/ cm3 | LPM | LPM | LPM | m3/min | ||
4 | 170 | 60 | 110 | 90 | ||
By - Pass | 6 | 210 | 75 | 135 | 125 | 800 |
Fully | 7 | 230 | 85 | 145 | 145 | to |
Open | 8 | 245 | 90 | 155 | 165 | 1100 |
10 | 265 | 95 | 175 | 195 | ||
4 | 160 | 160 | 80 | |||
By - Pass | 6 | 200 | 200 | 112 | 500 | |
Closed | 7 | 220 | NIL | 220 | 132 | to |
8 | 235 | 235 | 150 | 700 | ||
10 | 250 | 250 | 187.5 |
Material | Stainless Steel |
Brand | Supremex |
Country of Origin | Made in India |
Height | 620 mm |
Width | 500 mm |
Depth | 320 mm |
Weight | 20 kgs |
Inlet pressure | 7 bar |
Flow Rate | 245 Lpm |
Extracted Smoke Volume | 98 mm/min |
The Medium Expansion Foam Generator unit consists of a stainless steel casing, a fan driven by a Pelton wheel turbine, four jet nozzles to discharge foam water solution in front of high-velocity air, an in-line inductor for foam suction and a nylon foam-making net.
Design and Operational Features:
Water from the fire hydrant engine is pumped into the generator through an in-line inductor, placed along the supply line. Foam concentrate and water are mixed in the inductor to make foam water solution, which is delivered to the generator. Part of the water supplied is diverted, to drive the Pelton wheel turbine. Through the four water jets, foam water solution is sprayed into the foam- making a net to produce foam.Can also be used as a smoke extractor.
Performance:
The unit produces high expansion foam up to 100m (3500ft) PER minute, depending upon the pressure applied. The foam generated is more fluid and heavy, therefore ideal for outdoor fuel spillage or where rapid, flowing foam is required.
Accessories:
The unit comes with polythene foam ducting, 30 m and reinforced plastic smoke ducting,7.5 m. These are optional and not part of standard equipment.
Applications:
Performance data:
All intel pressures refer to the pressure at the generator The following details arc nominal measurements.
Performance Table:
Inlet pressure | Water flow | Foam produced | Expansion ratio | Foam consumption3% |
bar | Ipm | m/min | Ipm | |
2.8 | 159 | 40 | 260:01:00 | 4.7 |
4.2 | 195 | 56 | 290:01:00 | 5.8 |
5.6 | 223 | 70 | 320:01:00 | 6.7 |
7 | 245 | 80 | 330:01:00 | 7.3 |
8.4 | 259 | 94 | 360:01:00 | 7.8 |
Material | Stainless Steel |
Usage/Application | Fire Fighting |
Brand | Supremex |
Working pressure | 7 Bar |
Capacity | 450 LPM |
Length | 910 mtr |
Weight | 4.7 Kg |
Material | Stainless Steel |
Brand | Supremex |
Inlet Pipe Size | 2.5 inch |
Hose Length | 1 mtr |
Flow Rate | 450 LPM |
Work Pressure | 10 Bar |
Weight | 5.5 Kg |
Length | 440 mm |
SE Inline Inductors provide means for accurate induction of foam compound into the water stream for the operation of foam branches and equipment. These Inductors are matched to SE Foam equipment. Available in Aluminum and G.M. options, the SE Inline Inductors are designed for 3% or 6% induction, the inductors are available with nominal foam solution capacity of 225 and 450 Lpm, as well as tailor-made to client requirements. Variable options also available.
Performance:
Model | Nominal Flow 1pm | Recommended Operating | Length | Weight |
( at 7 bars*) | Pressure Bars | mm | Kgs | |
SE ILI | 225 | 5 – 10 | 440 | 5.5 |
225 | ||||
SE ILI | 450 | 5 – 10 | 440 | 5.5 |
450 |
3.9/5
Reviewed by 43 Users
Most Relevant Reviews